Resin Color Library

Another tilted mold during cure. Probably 1.4" thick at top left, 1/16" thich at bottom right.. Base color for #22.

At 1/8" thick you can see the bright spots where the light bulbs are when holding it up to the light.

Just a little darker red than the Ruby Red. Base for #24.

The pearl white almost looks like silver floating on the red. Barely distinct translucent- you can kindof tell where the light bulbs are when you hold up the 1/8" sample to the light.

Aiming for a darker version of #3, but to my eye this looks almost identical despite 50% more dye. Base for #26

Much closer to purple instead of lavender like earlier recipes, mostly due to less pearl white. Translucent enough to distinctly see the bulbs when held up to the light.

Base for #28.

Trying for a candy apple red, but the gold added enough yellow to push this to an orange. With the small amount of pigment, a 1/8" piece is transparent enough to really see (not just tell where they are) the bubs when held up to the light.

Darker version of #7, but hard to tell them apart. Base for #30.

Nice look with the pearl, but still translucent at 1/8".

Just pulled this off when mixing #32 to have sample halfway between #19 and #31. Held up the light, I can see the difference between #31 and #32, but it's subtle.

The base for #33

Second try at a candy apple red, and I think this one came out pretty good. Essentially transparent at 1/8", but looks great in a 5/8" block.

First try at a solid purple after getting new pigments. Nice luster purple. Mostly opaque at 1/8".

Totally opaque.

Opaque. I wonder how much of the pearl will show up once I turn the block.

Heavily opaque, can just see light through this at 1/8".

Heavily opaque, can just see light through this.

Totally opaque. The powder is a much brighter, almost cardinal red. This cured to a deep blood red.

Totally opaque. Nice sparkle.